Stellar FL

Lithium rechargeable battery

Red light output (Astro mode) with 3 brightness settings

Filament LED light

Cool LED light output

Warm LED light output

USB C charging input

Dimmable brightness control

Rubber elastic mounting band with carabiner hook

IP44 Weatherproof

Filament maximum lumens: 125
Filament colour output: 4000 Kelvin

Warm white LED maximum lumens: 55
Warm white LED colour output: 1000 Kelvin

Cool white LED maximum lumens: 130
Cool white LED colour output: 5500 Kelvin

Red LED maximum lumens: 35
Red LED colour output: 1000 Kelvin

Operating temperature: 0 - 50
IP Rating: 44
Dimension: 104 x 104 x 98 mm
Weight: 150 grams


Included in the box:
x1 lantern
x1 Carabiner
x1 USB-C 1.0m cable
x1 USB-C to Micro adapter
x1 Velcro cable support strap

Red LED's:
10 hours - High
18 hours - Medium
48 hours - Low

Filament LED's:
5.5 hours - High
60 hours - Low

Warm white LED's:
6 hours - High
60 hours - Low

Cool white LED's:
6 hours - High
60 hours - Low

Filament, Warm and Cool LED's: (All LED's on)
3 hours - High
24 hours - Low

Charge time: 3 -4 hours

Recharging time will vary depending on your USB charging devices performance.

Battery type: Lithium 18650
Battery size: 2000 mAh, 3.7V (x1)
Battery capacity: 2000 mAh @3.7V, 7.4 Wh
Battery chemistry: Lithium NMC

Red LED Astro mode:

Single press:
On - Low - Medium - High - Off

Double press:
Switches light modes between red light and white light modes

White Filament and LED mode:

Single press:
On - Filament LED’s High - Warm LED’s High - Cool LED’s High - Filament and all LED’s on - Off

Press and hold:
Activates dimming ( High to Low ) and ( Low to High)
Note: the LED light will flash when lowest and highest brightness is reached

Single press (after a 5 second delay) will turn the light off.

Note: The user will need to cycle to the desired light colour mode with in a 5 second period, after the 5 seconds the light will turn off after a single press.

USB input: Type C, 5.0 Vdc, 1.0A 5 Watts
USB output: N/A

Over charging
Over temperature
Low voltage (auto turn off)

ABS plastic
Metal mild steel
Polycarbonate plastic

Locate and remove the rubber charging port cover on the top of the lantern
Connect the USB-C charging cable.

While the lantern is charging, the power switch LED indicator light will illuminate red.
Once the lantern has reached full charge, the power switch LED indicator will turn green.

Once the flashlight is fully charged, disconnect the USB-C cable and replace the rubber cover.

For ideal battery performance Astro Night recommend recharging the Stellar lantern every few months while not in use or in storage.

Recharging times will vary depending on your charging ports output performance.

12 months